Wearables Can Improve Worker Health and Safety

Sat, May 18, 2019 at 3:15PM

Karen L. Edwards, Director of Communications and Member Engagement, RT3

At this year’s International Roofing Expo, there was plenty to see on the show floor with technology being a key focus. In fact, the Roofing Technology Think Tank (RT3) presented a contractor panel where they discussed emerging technologies as well as existing ones and how these solutions are making an impact on their businesses.

Discussions focused on how augmented reality will change field service, how robotics and automation both on the roof and in the air will impact the industry, how GPS and other tracking can save thousands of dollars, and how technology will change the way the industry interacts with home and building owners, as well as with insurance companies.

One solution that has a promising outlook for the industry is the use of wearable technology to improve worker safety. Wearable technology can be as simple as a GPS tracker in a safety vest that can send an instant alert when a worker enters a predefined danger area on a job site, such as being within so many feet of the roof perimeter. There are also exoskeletons that have been created to assist workers with lifting heavy loads, reducing the chances of back injuries or strains.

While visiting Microsoft’s Internet of Things (IOT) lab last fall with RT3, we saw smart helmets that could detect impacts and wearable monitors that could track workers’ vital signs such as heart rate and body temperature – valuable information that can let you know when a worker should stop and take a break.

While all of this data can be lifesaving, contractors implementing the use of these devices should be prepared to ensure that their workers’ privacy and data are protected. The good news is that most companies that are providing a technology solution should have the infrastructure in place to make sure that the data is protected and that privacy remains intact. However, as we have seen time and again, data breaches are not uncommon.

RT3 member Trent Cotney of Cotney Construction Law said that contractors using new wearable technologies to keep employees out of harm’s way should revise their employee manuals to provide information on how to properly use the wearable technology. Further, contractors should include in employee manuals that while the wearable technology will better assist in keeping employees safe, it is not a guarantee and workers should still exercise caution when performing dangerous activities or working in hazardous areas.

The World Wide Web just celebrated its 30th birthday and we have seen so many changes over those 30 years. We’re excited to see what’s coming next and how worker safety will benefit from new, emerging technologies. Stay up to date on the latest news in the industry, sign up for the RT3 Smart Brief newsletter at www.rt3thinktank.com.

FRM

Karen L. Edwards is the Director of Communications and Member Engagement for the Roofing Technology Think Tank.


Bookmark & Share